Hydraulics | Gauges & Measurement (15 results found)

HEDLAND
3500/6000 PSI Flow Meters For Petroleum Fluids
Flow ranges: 0.02 - 0.2 GPM (0.1 - 0.75 LPM) up to 20 - 300 GPM (100 - 1100 LPM) Construction: Aluminum, brass and T303 stainless steel Sizes: 1/4" to 3" ports ... More >
Product Page | Features | Catalogs & Downloads
Return to Top
HEDLAND
3500/6000 PSI Flow Meters For Phosphate Ester Fluids
Key Features Ports: SAE, NPTF, BSPP, Code 62, 4-bolt flanged Pressure up to 6,000 psi (414 bar) maximum Temperature up to 240 °F (116 °C) Accuracy ±2% full scale ... More >
Product Page | Features | Catalogs & Downloads
Return to Top
HEDLAND
3500/6000 PSI Flow Meters For Water-based Fluids
Key Features Ports: SAE, NPTF, BSPP, Code 61 and Code 62, 4-bolt flanged Pressure up to 6,000 psi (414 bar) maximum Temperature up to 240 °F (116 °C) Accuracy ±2% ... More >
Product Page | Features | Catalogs & Downloads
Return to Top
Settima
Volumeter - Flow Rate Transmitter
Key Features Designed for metering of viscous fluids Uses Screw Transmitters Highly Accurate independent of viscosity Capabilities Low or No Noise High Flow Dirty ... More >
Product Page | Features
Return to Top
Hydac
Hydraulic Hand-Held Data Recorders
Model Series HMG 500 Series HMG 510 Series HMG 3000 Series ... More >
Product Page | Features | Catalogs & Downloads
Return to Top
Parker Hydraulic Group
GF Series Gauge Snubber
Series GF valve isolate gages from damage and inaccurate readings caused by line pressure surges and hydraulic hammer. Operation: The GF uses a capillary orifice to ... More >
Product Page | Features | Catalogs & Downloads
Return to Top
Parker Hydraulic Group
GT Series Gauge Isolater
Series GT valves isolate gauges from damage and inaccurate readings caused by line pressure surges and hydraulic hammer. Operation: The GT has a push-to-read knob that ... More >
Product Page | Features | Catalogs & Downloads
Return to Top
Hydac
MA Series Single Gauge Isolator
Key Features Gauge life is extended by using the MA 1 when reading pressure.  When not reading pressure, the gauge is vented to tank to protect  the gauge against ... More >
Product Page | Features | Catalogs & Downloads
Return to Top
Hydac
MA1 Series Single Gauge Isolator
Gauge life is extended by using the MA1 when reading pressure. When not reading pressure, the gauge is vented to tank to protect the gauge against pressure from the ... More >
Product Page | Features
Return to Top
Hydac
MSL Series Mulit-Station Gauge Isolators
Key Features Zero Leak Integral Gauge 1-6 Measuring ... More >
Product Page | Features | Catalogs & Downloads
Return to Top
Hydac
MS Series Multi-Station Gauge Isolators
Key Features Check Up to 6 different pressures in a hydraulic system Gauge built directly into selector knob Built in detent locks any selected position Model Series ... More >
Product Page | Features | Catalogs & Downloads
Return to Top
Parker Hydraulic Group
Fluid Level/Temperature Gauges
Key Features Lens: Transparent polyamide  Lens base: Nylon 66  Shroud: High impact polystyrene (no aluminum content)  Seals: Nitrile  Maximum ... More >
Product Page | Features | Catalogs & Downloads
Return to Top
Hydac
FSK Series Fluid Level Indicator with Electric Level Switch
Key Features Contact Ratings Max. 8W Maximum Voltage 50V AC or DC Maximum Current 200 mA Magnetic Float inside tube trips switch when fluid level drops within 50mm ... More >
Product Page | Features | Catalogs & Downloads
Return to Top
Oildyne
Heavy Duty Pressure Switches For AC Power
Key Features 3.4-345 bar (50-5000 psi) Range Versatile Our designs allow the switches to be used in any  mounting orientation. They can sense hydraulic fluid  ... More >
Product Page | Features | Catalogs & Downloads
Return to Top
Hydac
HPG Series 2 1/2" Face, 1/4" NPT Connection
Key Features 2 1/2 inch face 1/4”NPT Connection ... More >
Product Page | Features | Catalogs & Downloads
Return to Top