Comoso Controlled Motion Solutions

Manifold Fitting Nomenclature

• 1/8 M = 1/8 Male NPT one end & branch outlets as required
  
• 1/8MM = 1/8 Male NPT and mixed branches
  
• 1/8MV = 1/8 Male NPT and 2nd row at 60° either L or R
  
• 1/8MMV = 1/8 Male NPT w/mixed branches at 60° either L or R
  
• 1/8MT = 1/8 Male NPT with branches at 180°
  
• 1/8MMT = 1/8 Male NPT w/mixed branches at 180°
  
• 1/8MB = 1/8 Male NPT Manifold blank
  
• (wall thickness suitable for 10-32 thread)

Branches can be arranged in various attitudes in thousands of combinations to accommodate specific requirements. 

Mem-co’s line of Unitized Manifold Fittings is directed primarily at the high volume user who must have a • low cost • compact • zero leak potential • neat appearing fitting that requires a minimum amount of labor to install and can be customized to his specific requirements.

For smaller volume users Mem-co does carry a limited number of manifold fittings as stock items shown below.

Branch sizes are called out in order starting at the threaded end. 1/8MM-44222 (Figure 1) signifies a mixed manifold 1/8 NPT fitting with two #4 branches and three #2 branches in-line.

1/8MM-42422 signifies a similar manifold on which the 2nd and 3rd branches have exchanged positions.

In the case of “V” arrangements, the side having the largest branches is considered to be the vertical side (at 12 o’clock); the other side is either to the right or left of vertical as viewed from the threaded end of the fitting.

1/8MMV-44-22L (Figure 2) signifies a “V” type 1/8 NPT manifold fitting with two #4 branches and two #2 branches on each row with the second row to the right as viewed from the threaded end.