Parker Pneumatic
DD10 Mini Inline Desiccant Dryer

Key Features

  • Disposable
  • Used for parts blow off
  • Protection for paint guns
  • Non-toxic desiccant standard
  • Polycarbonate material allows clear desiccant visibility

Click to Enlarge

Used at the point-of-use, this disposable, mini inline desiccant dryer removes all traces of water vapor, oil vapor and dirt. It is often used directly upstream of blow guns or spray guns as final protection for critical parts blow off and paint spraying. Install in either direction; it functions in both directions.

A 40 micron, porous bronze element removes fine dirt particles, an oil removing media removes oil vapor, and desiccant beads absorb water vapor. The see-through housing shows desiccant color change from the original orange to a green color in the desiccant beads,

Installation

The DD10 is equipped with a 1/4" NPT (F) and (M) ports and can be installed in either direction. When installing the filter/dryer hand tighten to a leak proof seal. Do not use any mechanical means to hold the filter/dryer and do not over torque the threads. 

Housing.......................................................................... Polycarbonate
Port threads............................................................................1/4" NPT
Maximum flow capacity........................................................ 15 SCFM
Maximum pressure rating................................125 PSIG (0 to 8,6 bar)
Maximum temperature rating.......................................... 130°F (54°C)
Operating temperature rating................. 32°F to 130°F (0°C to 54°C)
Weight.............................................................................2.8 oz. (79.4 g) 

Catalogs