Parker Hydraulic Group
IQAN-XS2 Expanion Units

THIS PRODUCT IS RETIRED.  CONTACT COMOSO FOR SUGGESTED REPLACEMENTS.

Key Features

  • This unit is designed for high digital I/O count, weather resistance, and safety
  • The XS2 module has a large number of inputs and outputs that allows the user to have fewer modules for digital signals.
  • The IQAN-XS2 can control valves using digital (on-ff) output signals
  • The aluminum housing is designed to be rugged, but light and has a sealed, automotive AMP/Tyco power timer connector.

Part Numbers

  • IQAN-XS2 - 5010017

Quote Request
Click to Enlarge

Application

The IQAN-XS2 is the next generation of expansion module in the IQAN product group and is used with the IQANdesign platform. This unit is designed for high digital I/O count, weather resistance, and safety. 

All IQAN expansion modules communicate with a master over a CAN bus. The XS2 module has a large number of inputs and outputs that allows the user to have fewer modules for digital signals.

The IQAN-XS2 can control valves using digital (on-off) output signals. The analog inputs accept 0-5V signals from input devices or sensors. These analog inputs may alternatively be used as high impedance digital inputs for switches. The XS2 also has a number of dedicated digital (on-off) inputs.

The aluminum housing is designed to be rugged, but light and has a sealed, automotive AMP/Tyco power timer connector. The XS2 has a membrane to prevent condensation inside the housing. This controller is designed for the outdoor environment.

The unit executes a self-test during start up and cyclic operation. An internal watch dog checks for software errors and will interrupt outputs if errors are detected. The IQAN-XS2 is made using selected components and conforms to strict international requirements.

Diagnostics: If an error is detected an LED on the top of the controller flashes a sequence to indicate the nature of the error.