Schmersal
TESF Hinge Safety Switch
TESF Hinge Safety Switch
Key Features
- Tamper-resistant … integral switch elements and actuator prevent bypassing.
- “Positive-break” NC contacts … ensure circuit interruption when guard is opened to user’s desired switching position (angle of opening).
- User-selectable switching point … makes unit suitable for a wide range of applications.
- Models available for inside-of-guard or front-of-guard mounting … for application versatility.
- Choice of top or bottom cable entry … for installation flexibility.
- Permits wide guard opening … up to 180°.
- Splash-proof design … meets IP65 environmental requirements.
- Slotted mounting holes … permit installation to most 30mm to 60mm aluminum profiles.
- Rugged construction … tolerates mechanical abuse and hostile environments.
- Designed to meet the Performance Level requirements of EN ISO 13849-1 and Safety Control Categories of EN 954-1.
Part Numbers
- TESF/CC/0
- TESF/CC/180
- TESF/CC/U
- TESFA/CC/0
- TESFA/CC/180
- TESFA/CC/U
- TESF/S/CC/0
- TESF/S/CC/U
- TESFA/S/CC/0
- TESFA/S/CC/180
- TESFA/S/CC/U
- TESF/0
- TESF/180
- TESF/U
- TESFA/0
- TESFA/180
- TESFA/U
- TESF/S/0
- TESF/S/180
- TESF/S/U
- TESFA/S/0
- TESFA/S/180
- TESFA/S/U
- TESF/S/ST24.2/0
- TESF/S/ST24.2/U
- TESF/ST24.1/0
- TESF/ST24.1/180
- TESF/ST24.1/U
- TESFA/ST24.1/0
- TESFA/ST24.1/180
- TESFA/ST24.1/U
- TESF/S/ST24.1/0
- TESF/S/ST24.1/180
- TESF/S/ST24.1/U
- TESFA/S/ST24.1/180
- TESFA/S/ST24.1/U
- TESF/ST24.2/0
- TESF/ST24.2/180
- TESF/ST24.2/U
- TESFA/ST24.2/0
- TESFA/ST24.2/U
- TESF/S/ST24.2/180
- TESFA/S/ST24.2/0
- TESFA/S/ST24.2/180
Click to Enlarge
The TESF Series is designed for use with movable hinged machine guards which must be closed for operator safety. Their tamper-resistant design and positive-opening NC contacts provide a significantly higher level of safety than conventional, spring-driven limit switches or proximity switches often used to monitor hinged guard positions.
Their compact, low-profile design and IP65 rating make them ideal for interlocking hinged safety guards in industrial environments. Designed to mount directly on the hinged guard and its stationary frame, it is easy to install on a wide range of extruded aluminum guard sizes and other guard styles.
Among its unique features is its ability to adjust the switching point in the field to meet specific application requirements.* Once adjusted, the switching point is easily permanently locked to prevent further adjustment by unauthorized personnel. In addition it features top or bottom cable entries, 1 NO or 2 NO and 2 NC contacts, designs suitable for inside or outside-guard mounting, and the ability to open a full 180°.
*Note: The unit is delivered factory set with a switching point at a 3° opening angle with positive-break occurring at 5°. Please note that with use this factory-set point may increase 2° during lifetime. This should be considered ... especially where finger or hand protection is desired.
Catalogs
TESF Catalog
494.8 kB