Vescor
SGC Series Quick Change Fluid Sight Level Gauge

Key Features

  • Front mount
  • Fluid level visible from front of gage (.75 inches wide)
  • Clear sight glass
  • Card thermometer, dual scale 0° to 220°F and -20° to 110°C graduations
  • Mounting studs accommodate reservoir wall thicknesses up to .56 inches
  • Suitable for use with most hydraulic and machine lubricating oils

Quote Request
Click to Enlarge

The SGC Series front mount closed circuit sight gages provide front viewing of the fluid level through a clear sight glass. Integral to the sight gage is a thermometer contained within a white colored card for direct reading of the fluid temperature. The white colored card helps draw eye contact to the fluid level quickly. Check valves integral to mounting studs allow for removal of sight gage without having to drain the reservoir.

NOTES:

  • Access to inside of reservoir is required to mount studs with integral check valves.
  • Please refer to Appendix RA-11 on page RA-A10 for installation instructions

Standard Materials:

  • Aluminum & Brass Construction
  • Buna N seals
  • Borosilicate glass sight

Temperature and Pressure Ratings:

  • 20 psi (138 kPa) maximum working pressure at 150°F (65°C)
  • Please refer to Temperature Ratings by Seal Material for additional operating conditions (Appendix RA-5 on page RA-A5).

CAUTION: Not recommended for use with water, steam, acidic fluids, caustic fluids and volatile fluids