Parker Hydraulic Group
F130 Series Mobile Directional Control Valve

Key Features

  • Low lever forces give comfortable operation when the valve is controlled directly.
  • Can be flanged to both standard and specially customized function manifolds. This enables even more functions to be integrated into a single unit in a compact system, with minimal piping.
  • Mid-inlet sections enable compact system construction, even in systems with several pressure levels.
  • Can be equipped for both multi-pump and multi-valve systems
  • Very wide range of application adapted spools designed to optimize control characteristics.
  • Pressure compensated spools, which further improves control and simultaneous-operating characteristics.
  • Separate check valve in each spool section
  • Separate port-relief valve in each service port gives individual maximum pressure limitation.
  • Low pressure drops keep down energy losses and reduce the generation of heat.
  • Machined land edges in the valve housing guarantee good control characteristics.
  • Low internal leakage and long service life.
  • Customizeable
  • Open spool ends with rubber bouts increase the service life of both spools and spool seals.

Click to Enlarge

The F130 is stackable and can be supplied in combinations of 1 to 11 spool sections, and in combination with one or more manifolds (function blocks). The valve is designed for system pressures of up to 320 bar and can be equipped with port relief valves in the service ports for a maximum pressure of 350 bar. The F130CF has a flow range of 60 – 110 l/min, depending on how the valve is equipped. The F130CP has a flow range of 60 – 150 l/min. There is a wide range of spools for the valve.