Parker Hydraulic Group
TP16 Series Aluminum Bushing Gear Pump

Key Features

  • Flows to 37 GPM per section
  • Tandem & triple section units available
  • Pressures to 3000 PSI
  • Speeds to 3600 RPM
  • Also available as motor
  • Priority flow available
  • Dry valve option
  • Clutch pump available

Quote Request
Click to Enlarge


General Information for P16 Series

Available in various configurations

  • P16 — Single Section
  • TP16 — Tandem, 2 & 3 Place
  • PVP16 — Priority Valve
  • CP16 — Clutch Pump ‘V’ Belt and Serpentine

  • Cast iron pumping sections for durability
  • Aluminum flanges and covers for optimum power to weight ratio.
  • Journal bearings for long life and good over-hung load capability
  • Buna-N Seals are standard for petroleum and glycol based fluids. “Viton®E” seals are optional.
  • Pressure balanced plates for greater efficiency.

Single

  • Description ..................................... Gear Pumps (Two-place)
  • Flow Range .................. To 32 GPM (121.1 LTR) Per Section
  • Displacements .................. To 3.904 C.I.R. (63.94 CC’s/REV.)
  • Maximum Pressure to ............................ 3000 PSI (207 BAR)
  • Maximum Speed to .................................................. 3100 RPM
  • Rotation ............................................................................ A or C
  • Bearings ......................................................................... Journal
  • Construction ................................ Cast Iron Gear Plates with Aluminum Flange, Connector and Cover Plates
Triple

  • Description .................................. Gear Pumps (Three-place)
  • Flow Range ................. To 32 GPM (121.1 LTR.) Per Section
  • Displacements .................. To 3.904 C.I.R. (63.94 CC’s/REV.)
  • Maximum Pressure to ............................ 3000 PSI (207 BAR)
  • Maximum Speed to.................................................. 3100 RPM
  • Rotation ............................................................................ A or C
  • Bearings ......................................................................... Journal
  • Construction ................................ Cast Iron Gear Plates with Aluminum Flange, Connector and Cover Plates