7243 Series LP Gas Hose Stainless Steel Reinforced – Textile Cover UL21
Series 7243 is a textile-covered, small diameter, extremely durable liquefied petroleum gas (LPG)/propane transfer hose in applications such as fuel line hose on forklifts and utility equipment. The hose meets all Underwriter Laboratories (UL21) requirements. The construction incorporates high tensile stainless steel braided reinforcement for superior strength, durability and kink resistance. The textile cover is resistant to abrasion, mild chemicals, and ozone. Series 7243 is qualified with Parker crimp couplings and is compatible with Parker Series 20 field reattachable fittings.
Applications
- LP gas/propane
- Fork lifts
- 7243-251, 7243-311, 7243-401, 7243-501
The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7243 may be used for natural gas service, but ONLY under ALL of the following conditions:
- The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
- Series 7243 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.
Series 7243 and Compressed Natural Gas (CNG): Series 7243 is not for use in any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer.
Tube: | Black nitrile |
Reinforcement: | One stainless steel braid |
Cover: | Black chloroprene-impregnated textile braid |
Temp. Range: | -40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C) |
Brand Method: | White ink with dashed spiral stripe |
Brand Example: | Side one: PARKER SERIES 7243 SS CAUTION LP GAS HOSE MH6737 U ® ISSUE NO. XXXX 350 PSI MAX WP (DATE CODE) Side Two: CAUTION FOR LP GAS USE ONLY 1750 PSI MIN BURST |
Design Factor: | 5:1 |
Industry Standards: | UL21 |
Vacuum: | Not recommended |
Compare to: | Gates Stainless Steel LPG |
Packaging: | Reels |