Parker Industrial Hose
7170 Series LP Gas Hose UL569, CSA
7170 Series LP Gas Hose UL569, CSA
Series 7170 is a flexible, lightweight hose connector for transfer of liquefied petroleum gas (LPG)/propane in barbecue grills, portable heaters, weed burning apparatus and similar appliances. The hose meets all Underwriters Laboratories (UL569) and Canadian Standards Association (CSA) requirements. The construction incorporates multiple textile plies of reinforcement for flexibility and kink resistance. The perforated cover is resistant to mild chemicals, oil and ozone.
Applications
- LP gas/propane
- Cookers, grills, heaters, weed burners, small appliances
- Consumer, general industrial
Model Series
- 7170-25354, 7170-38354
Click to Enlarge
Series 7170 and Natural Gas: The molecules of natural gas are small, enhancing their ability to permeate through standard rubber hose constructions. The permeation process is more rapid as the working pressure increases, and natural gas accumulates with potentially dangerous consequences. Series 7170 may be used for natural gas service, but ONLY under ALL of the following conditions:
- The application must be in a well-ventilated environment: Outdoors, or indoors with significant continuous air movement.
- Series 7170 is not to replace fixed/rigid pipe where that material is more appropriate due to reduced permeation and overall strength and durability. Use rigid pipe, non-permeable tubing or hose with barrier constructions to convey natural gas whenever possible.
Series 7170 and Compressed Natural Gas (CNG): Series 7170 is not for use in any CNG application, including fuel dispensing, on-board vehicle fuel lines, or fuel transfer.
| Tube: | Black nitrile |
| Reinforcement: | Multiple textile plies |
| Cover: | Black chloroprene; perforated smooth finish |
| Temp. Range: | -40°F to +180°F (-40°C to +82°C) (The hose construction is capable of this rating, but LP Gas should NEVER be conveyed over 140°F/60°C) |
| Brand Method: | Impression |
| Brand Example: | PARKER SERIES 7170 (ID) CSA® CAN 1-8.1 - CAUTION - LP GAS HOSE 5 PSI/350 PSI C U ® US MH11955 MADE IN USA (DATE CODE) |
| Design Factor: | 5:1 |
| Industry Standards: | UL569; CAN/CGA-8.1-M86 Type I |
| Vacuum: | Not recommended |
| Compare to: | Thermoid Type 75 |
| Packaging: | Reels |
Catalogs
7170 Series Catalog
205.7 kB