Noshok
700 Series Block & Bleed, Soft Seat Needle Valves

Key Features

  • Block & bleed design allows pressure to be bled off without disturbing the 
    permanent piping installation, allowing quick and easy removal or 
    replacement of instruments
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance 
    and reliability
  • 6,000 psi pressure rating @ 200 °F
  • Replaceable Delrin® seat and straight through porting for bidirectional, 
    high capacity flow and easy roddable cleaning
  • PCTFE or PEEK soft seat optional
  • Blow-out proof stem provides a secondary stem seal in the full 
    open position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE packing optional
  • All stems are 316 stainless steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)
  • 0.090" bleed hole located on the bottom is controlled by a 1/4"-20 UNF-2A bleed screw
Click to Enlarge

SPECIFICATIONS
MaterialsZinc-nickel plated steel, electropolished 316 stainless steel
Connections1/4" & 1/2" NPT
Male-female & Female-female configurations
Pressure ratings6,000 psi @ 200 °F
Orifice size0.187"
Flow coefficientCV 0.76
Steam seal & typeAll 316 stainless steel stems with FKM o-ring and PTFE back-up ring below the threads, PTFE 
packing optional
OptionsPanel mountings, o-ring materials, handles, packings, regulating stem and stem tips

Catalogs