MICO Fuse 24 LED
- 24 VDC
- LED's
- 8 channels
- Total current:: max. 40 A
MICO Fuse 24 LED is an 8-channel fuse holder. As many as 8 fuses (5x20mm) can be inserted from upside. The operating voltage (+24V DC) supplies 8 current monitored load circuits (channels). By exceeding the trip current, the fuse will blow out pursuant to the fuse characteristic. Then the corresponding channel is disconnected from the power supply. After elimination of failure in load circuit the fuses can be replaced easily. The current operating condition is signalled by the LEDs, in red/green (see displays). In addition, the module is provided with a message output to give a summation message (see control output).
The GND-connection of the module is only for a supply of internal electronics. Load GND must be connected directly to the power supply with separate wires.
Fuses must be ordered separately.
- 9000-41078-0000002 2A, 8 pieces 477 series of Littelfuse
- 9000-41078-0000004 4A, 8 pieces 477 series of Littelfuse
- 9000-41078-0000006 6.3A, 8 pieces 977 series of Littelfuse
Technical Data
- Operating voltage: 24 V DC (18...30 V DC)
- Operating current max. 6 A (40°C)
- Total current max. 40 A
- Group alarm output max. 20 mA; high: all channels ON; low: not all channels ON
General Data
- Connection Spring clamp terminals
- Input terminals 1 × 16 mm²
- Output terminals per output 1 × 4 mm²
- Alarm terminals 2.5 mm²
- Mounting method DIN-rail mountable TH35 (EN 60715)
- Temperature range -25...+55 °C