Origa
2002 Series Pneumatic Rodless Cylinder

Bore sizes (mm): 16, 25, 32, 40, 50

The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various mounting and control options are available for specific application needs. 

ORIGA is the specialist in the rodless cylinder field. ORIGA has the largest range of bore diameters and can offer the longest stroke lengths with application oriented accessories for cost effective designs. ORIGA has experience in all conceivable areas of industry, attributable to the thousands of applications in which ORIGA rodless cylinders are used.

Quote Request
Click to Enlarge

End Of Stroke CushioningAdjustable cushioning is provided as standard and ensures the piston stops smoothly, even at high speeds.
Oil Free Operation
The Parker ORIGA permanent lubricating grease eliminates the need for regular oil mist lubrication and provides long service life. Cylinders can be used in applications where maximum cleanliness is required.  (e.g. electronics pharmaceutical and food processing industries).
Slow Speed Applications
The construction of the Parker ORIGA rodless cylinder allows for a low friction characteristic permitting extremely slow traversing speeds. For speeds below 4 inches / second we recommend that Parker ORIGA “slow speed” lubrication is specified.
Temperature Range/Piston Speed
Standard Buna-N seals are suitable for temperatures from15°F to +175°F. Viton seals are required for higher temperatures as well as for use when piston speeds exceed 5 ft./sec. Please contact the Parker ORIGA Technical Department if the required operating temperature is above 175°F.
Magnetic Pistons
All Series 2002 cylinders are supplied as standard with magnetic pistons for proximity switch actuation.
Proximity Switches
Magnetically operated Hall Effect switches (IS) or Reed switches (RS) are available to sense piston position at any point over the entire stroke length.
Corrosive Environments
All screws are plated. In extreme applications stainless steel can be supplied.
Special aluminum coatings are available for added protection against chemical or caustic wash down of equipment or in environments where corrosive gases are present.
Cylinder Loading
Values are based on shock-free duty and should not be exceeded during piston acceleration.

Operating Pressure:  Max. 120 PSI